Configuration: NEW Cloud UI Product Detail Page

Follow the instructions below to configure products using the new Cloud UI Product Detail Page.

Prerequisite Tasks

This section describes all requirements that must be completed before you can begin setting up this feature. Once these tasks are complete continue to the next section.

Infrastructure Tasks REQUIRED

• Ensure that your environment has been upgraded to the latest infrastructure recommendations and Cloud UI is enabled. If you have any questions on the status of your environment, reach out to your Aspenware representative

• Upgrade to Aspenware Commerce 3.3 or later.

• Work with your Aspenware Service Agent (support@aspenware.com) on using Theme Designer to theme Cloud UI pages. See the Cloud UI Theming Details to learn more about what is customizable for the Cloud UI PDP.

Marketing Site / Email Update Tasks

For the best user experience, it is advised that product detail page deep links on the marketing site and from emails be updated to use the new url path, which uses an /l/ between the host domain and category slug rather than an /s/. See the “important” box above.

If a deep link to a PDP is not updated, or a link is updated to use the Cloud UI url and that product page should continue to render in Legacy, the shop will handle re-directing the user to the correct experience (Legacy or Cloud UI) automatically so that customers have a consistent experience with a given product, regardless of their origination route. This auto-redirection can be enabled and disabled using the setting ‘awcloud.redirectenabled.’ We recommend that resorts update their deep links rather than rely on this failsafe, as there can sometimes be a “blip” when using the awcloud.redirectenabled for redirection.

Commerce Tasks

• If the product is configured to show the pricing calendar as the landing page, ensure the Cloud UI Full-Page Pricing Calendar is set in advance.

• Configure Product Shell and Product Attributes as usual, but consider the following differences for the Cloud UI PDP.

  • [Dynamic] and [Conditional] are no longer needed as the Dynamic box is not used for the Cloud UI PDP and conditional logic will be driven off the Conditional Attribute setup described in Section 5 of the Product Attributes Configuration Guide.

  • Cloud UI offers better coach messaging if an attribute is required but not preselected. Defaults no longer need to be defined unless the product uses the pricing calendar.

  • Upgrade your Experience is a configurable Language String (see below)

  • Attribute descriptions are configured differently from what is documented in section 6 of the Product Attributes Configuration Guide. Follow the instructions below for Attribute descriptions.

  • Meta title text and price from related product’s configuration pulls through on related product cards.

• Flag products that are not compatible with Cloud UI so that they continue to render in the Legacy UI. See section 1 below for flagging instructions and a complete list of incompatible product types.

• Update the following settings in Aspenware Commerce Admin.

Note that if the short or long description exceeds 3 lines, the first 3 lines will display and the “See more” hyperlink will appear on the PDP. Users then have the option to click to expand and read all of the details. In usability testing, about 15% of users clicked to read more.

Click the square icon to expand the table ->

Detailed Setup Guide

1. Flag products that are incompatible with the Cloud UI PDP to continue to use Legacy UI PDP

2. Define Attribute Title(s) and Description(s) (Optional but Highly Recommended)

3. Configure data to enhance the item summary and cart notice (Optional but Highly Recommended)

4. Customize Language Strings as Desired (Optional but Highly Recommended)

1. Flag products that are incompatible with the Cloud UI PDP to continue to use Legacy UI PDP

Most products are Cloud UI compatible, but there are currently some exceptions. If a product has any of the following features/configurations enabled on the PDP it should NOT load on the Cloud UI and should be flagged to continue to display Legacy PDP.

These products will continue to work if they retain their Legacy configuration and are flagged as noted below (Cloud UI compatibility is coming soon for most of these product types):

• Radio button date products (section 2 of this guide)

• Fast Flow

• Reservations

• Renewal

• IKON Friends and Family ticket

• Arrive Parking

• Retail

• Golf

For these listed exception products, there is a new product-level setting that enables some products to continue to load for users in the Legacy UI, and for the majority of products to load in the new Cloud UI. Respecting this routing will work whether a PDP is accessed via the category page, related product link, or cross-sell link. To flag a product so that it continues to load in the Legacy UI:

• Find the product from Catalog > Products >Edit

• Scroll to the Aspenware Commerce section of the edit page

• Locate the new product-level setting called Use Legacy Product Page.

• Check the box

• Click SAVE ALL SETTINGS

  

2. Define Attribute Title and Description (Optional but Highly Recommended)

In the Cloud UI PDP, Cloud customers can customize the titles and descriptions of product attributes. These titles and descriptions will appear above the corresponding attributes on the Product Detail Page (PDP).

To maintain a consistent design, the Cloud UI uses a predefined styling for attribute titles and descriptions. As a result, you won't have access to a rich text HTML editor for these fields. However, you can still include basic <a> links by using the plain text field if you want to link to external content from your attribute descriptions.

To edit product attribute titles and descriptions:

• Go to Catalog > Attributes > Product Attributes

• Scroll to the desired attributes and select Edit

• Edit the attribute as indicated below

• Click Save

Attribute titles and descriptions can also be displayed for add-on product selections, to better explain the add-on, as in the example below.

3. Configure Data to Enhance Item Summary and Cart Notice (Optional but Highly Recommended)

There are several options for enhanced product configuration on the Cloud UI PDP that will offer information to the guest before they add to cart. The following graphic illustrates the possibilities and instructions for configuring each element are outlined below.

Define Variant Names to Display in the Item summary and Cart notice

If a product has attribute combinations defined, admins can define a name for each variant (product attribute combination). This name will be used in the item summary shown to customers before adding to cart on the PDP to describe the selected variant. It will also be passed into Google Analytics 4 as the variant name. If no product attributes are used, the product name will display in the item summary and be passed to Google Analytics 4 as the variant name. If a variant name is not defined, the product name will be displayed.

For a better user experience and effective usage in Google Analytics 4 (GA4) reporting, it's advisable to review and edit all variants used on Cloud UI Product Detail Pages (PDPs). When doing so, aim for clear and concise variant names, keeping in mind that these names are visible to guests.

Variant names are also shown for add-on product selections to provide a more descriptive explanation of the add-on, similar to the example mentioned earlier. These variant names for add-ons will be set up and configured within the add-on product itself.

To edit product variant names:

• Go to Catalog > Products

• Edit the desired product.

• Expand the Additional Product Settings section. Within this section, if attribute combinations are defined, each attribute combination will be populated in the table and can be edited.

Define Max Prices for Variants to Display in the Item summary and Cart notice

If a non-dynamically priced product has attribute combinations specified, admins can set a maximum price for each variant (product attribute combination). For dynamically priced products, the maximum price should be defined using the Base Price feature in dynamic pricing. For products that don’t have attribute combinations, the maximum price should be defined using the “Old price” field in the product shell guide.

If a maximum price is defined, it will be used to highlight the cost savings when customers view the product summary before adding it to their cart on the Product Detail Page (PDP). This max price information will also be displayed for add-on products, showing the savings associated with purchasing online or in conjunction with another product in the add-on product experience.

It is recommended to edit all variants used on Cloud UI PDPs if the online price is cheaper than the maximum price to ensure an optimal user experience.

Max price can also be displayed for add-on product selections, to better explain the add-on, as in the example above. The max price for add-ons will be configured in the add-on product itself.

To edit product variant names:

• Go to Catalog > Products

• Edit the desired product.

• Expand the Additional Product Settings section. Within this section, if attribute combinations are defined, each attribute combination will be populated in the table and can be edited.
  

  

• If you want to configure the max price but not show it to the guest, you can hide savings information on the product or add on product itself within the Aspenware Commerce settings section. To hide savings information from displaying to guests uncheck “Show Max Price” and select Save All Settings. Show Max Price is true by default for all products.
  

  

4. Configure Button Group Control Type (Available in Cloud UI 1.5 or later)

To configure the Button Group for an attributed product, follow the standard configuration instructions to set up the attribute and simply select “Button Chip Selector” for the control type.

Depending on the type of attribute, horizontal or vertical chips will be triggered.

A vertical button group will be displayed if:

• If at least one attribute value exceeds the maximum width of ~7 characters.

• If any attribute value in the group has an associated add-on price.

• If any attribute value in the group contains a pipe character “|”.

Otherwise they will display as a horizontal button group.

5. Customize Language Strings as Desired (Optional but Highly Recommended)

Follow the instructions to edit the following language strings in Aspenware Admin.

Click the square icon to expand the table ->

Resource Name	Default/Function	Feature	Example
shoppingcart.addtocart	Default: ADD TO CART	Cloud UI PDP
products.relatedproducts	Default: Related Products	Cloud UI PDP - Related Products
productattributes.selectoption	Default: Select Option Function: If an option a product page (on the pricing calendar or the pdp) is not set, used to coach users that an option is not set but either required or optional (see below)	Cloud UI PDP and Pricing Calendar
optional	Default: Optional (parentheses are added by code, so don’t add parentheses) Function: Used in attribute selection coach messaging to indicate an option is optional, not required to enable add to cart	Cloud UI PDP
required	Default: Required (parentheses are added by code, so don’t add parentheses) Function: Used in attribute selection coach messaging to indicate an option is required, a selection is required to enable add to cart	Cloud UI PDP and Pricing Calendar
aspenware.commerce.cart.itemsummary	Default: Item Summary Function: Title of Item Summary Box on PDP	Cloud UI PDP - Item Summary
aspenware.commerce.cart.total	Default: Total Function: Label for the total of everything you are about to add to cart	Cloud UI PDP - Item Summary
aspenware.commerce.cart.yousaved	Default: You save Function: Label to summarize online savings compared to window rate for product being added plus all add ons prior to adding to cart and in cart notice.	Cloud UI PDP - Item Summary
aspenware.commerce.cart.startdate	Default: Start date Function: Label for selected date if product is dated	Cloud UI PDP - Item Summary
aspenware.commerce.cart.onlinesavings	Default: Save {}% off list price. (where percentage is dynamically populated). Function: Label to summarize online savings compared to window rate for item being added (may also be used in cart notice once implemented)	Cloud UI PDP - Item Summary
product.productattributes.addons.label	Default: Upgrade your experience Function: Title to separate the add on option selections from core product selections	Cloud UI PDP - Add ons
publicui.cartnotice.itemadded	Default: Item added Function: Cart notice title	Cloud UI PDP - Cart notice
publicui.cartnotice.applycoupons	Default: Apply coupons in the <a href="/cart">cart</a> Function: Description to link to the cart so that users know to apply coupons in the cart	Cloud UI PDP - Cart notice
publicui.cartnotice.checkout	Default: Checkout Function: Direct link to checkout if user is logged in. Will log user in then route to checkout if signed out.	Cloud UI PDP - Cart notice
publicui.cartnotice.viewcart	Default: View Cart Function: Direct link to full cart page.	Cloud UI PDP - Cart notice
publicui.cartnotice.itemsubtotal	Default: Per Item Subotal Function: Price per item of what was just added to cart before discounts have been subtracted from the item price.	Cloud UI PDP - Cart notice
publicui.cartnotice.itemstotal	Default: Per Item Total Function: Price per item of what was just added to cart after discounts have been subtracted from the item price.	Cloud UI PDP - Cart notice
publicui.cartnotice.carttotal	Default: Cart Total Function: Displays the subtotal (before tax) of the entire user’s cart.	Cloud UI PDP - Cart notice
publicui.cartnotice.itemupdated	Default: Item Changed Function: Title of cart notice if PDP is in edit mode and customer is changing something about an already added cart item.	Cloud UI PDP - Cart notice when product in edit mode