| Insert excerpt | ||||||
|---|---|---|---|---|---|---|
|
...
1. Create “AccessLocations” Collection
Go to the Collections tab.
Create a Collection by entering “AccessLocations” in the Name field, then clicking the ADD COLLECTION button.
...
2. (Optional) Create PassChecker Hotlist Reason” Collection
...
The Pass Checker POS Location ID is a setting from RTP|One, and can be sourced from your RTP|One administrator, (RTP|One/ Access Control Admin / Access Control Management / Access Location). This setting serves as a default lift or access point that passes will be validated against in the instance that additional “accesslocations” are not defined.
Go to the General tab and add and enter RTP|One’s Access Location Code (also referred to as the Location ID) in the Pass Checker POS Location ID field, then click the UPDATE GENERAL SETTINGS button.
...
2. Create “AccessLocations” Mappings
AccessLocation Mappings provides the ability to allow guests to check access to specific lifts. It also allows the resort to customize the Lift’s display name to the guest. A minimum of one mapping must be entered or Pass Checker will not return results when a guest searches for their pass.
Go to Collections and select “AccessLocations”
...
In the Value field input the corresponding Lift’s Access Location Code (also referred to as Location ID) from RTP.
Then click the ADD COLLECTION ITEM button.
...
Repeat this process for additional Lifts if required. If necessary, you can edit your Collection Item by selecting it, then clicking the UPDATE COLLECTION ITEM button. You can also delete using these same steps by clicking the DELETE COLLECTION ITEM button.
3. (Optional) Create Pass Checker HotList Reason display mappings
To replace RTP|One’s Hotlist message with more appropriate customer-facing language follow the same process from https://aspenware.atlassian.net/wiki/spaces/AE/pages/1502838928/Configuration%3A+Pass+Checker#2.-Create-%E2%80%9CAccessLocations%E2%80%9D-Mappings Configuration: Pass Checker for the Collection “Pass Checker-Hot List Reasons”.
| Info |
|---|
NOTE: Optional steps from the Pass Checker Prerequisites following prerequisite task must have been completed: https://aspenware.atlassian.net/wiki/spaces/AE/pages/1502838928/Configuration%3A+Pass+Checker#2.-Create-PassChecker-Hotlist-Reason%E2%80%9D-Collection-(optional) |
The Name field will be the text displayed to guests if their Pass Checker check comes back with a corresponding hotlist code from RTP|One.
...
Value: Input the hotlist code from RTP|One.
Click the ADD COLLECTION ITEM button.
...
Repeat this process for additional hotlist codes if required. If necessary, you can edit your Collection Item by selecting it, then clicking the UPDATE COLLECTION ITEM button. You can also delete using these same steps by clicking the DELETE COLLECTION ITEM button.
4. (Optional) Update Pass Checker Language Strings
Languages have default values but can be updated to match your display needs. Update the desired field then click the UPDATE LANGUAGE button to save the changes.
...
...