Pass Checker enables guests to enter their card number (passmedia# or RFID#) to check if their media will work at a specific lift. Among many use cases, guests can check if their pass is hotlisted due to incomplete tasks or if their pass is blacked out for the selected date.
Setup Checklist
This section is a comprehensive and high level summary of all tasks and prerequisites required for this feature to function properly. This section is purposed for use after an administrator is familiar with configuring this feature as an “audit” checklist. For detailed set-up instructions, jump down to “Prerequisite Tasks” and “Detailed Setup Guide” and then follow up with this checklist to ensure all steps are completed.
POS Tasks | |
1. Ensure Access Locations exist and are active REQUIRED | PREREQUISITES |
Infrastructure Tasks | |
1. Send request to Aspenware to enable or disable Pass Checker REQUIRED | PREREQUISITES |
Aspenware Arrival Tasks | |
1. Create “AccessLocations” Collection REQUIRED | PREREQUISITES |
1. Input Default Pass Checker POS Location ID REQUIRED 2. Create “AccessLocations” mapping(s) REQUIRED 3. Create “Pass Checker - Hotlist Reason” Collection & Add Hotlist mappings OPTIONAL 6. Update Pass Checker Languages Strings OPTIONAL | DETAILED SETUP |
Prerequisite Tasks
This section describes all requirements that must be completed before you can begin setting up this feature. Once these tasks are complete continue to the next section.
POS Tasks
1. Ensure Access Locations exist and are active.
Infrastructure Tasks
1. Submit a request to your Aspenware Service Partner to enable or disable Pass Checker.
Commerce Tasks
1. Create “AccessLocations” Collection
Go to the Collections tab.
Create a Collection by entering “AccessLocations” in the Name field, then clicking the ADD COLLECTION button.
Detailed Setup Guide
This section describes all required steps to set up the feature after prerequisite tasks have been completed.
1. Input Default Pass Checker POS Location ID
The Pass Checker POS Location ID is a setting from RTP|One, and can be sourced from your RTP|One administrator, (RTP|One/ Access Control Admin / Access Control Management / Access Location). This setting serves as a default lift or access point that passes will be validated against in the instance that additional “accesslocations” are not defined.
Go to the General tab and add and enter RTP’s Location ID numeric value in the Pass Checker POS Location ID field, and click the UPDATE GENERAL SETTINGS button.
3) Create PassChecker Hotlist Reason” Collection (optional)
If you would like to hide RTP Hotlist reasons with more appropriate customer-facing language, follow the procedure above to create a new collection, naming it “Pass Checker - Hotlist Reason”.
2. Create “AccessLocations” Mappings (Required).
Assign Items to the Collection by selecting the Collection (click in check box). This will launch the ADD NEW COLLECTION ITEM window.
5) Create Pass Checker HotList Reason display mappings (optional)
Follow the same process to add Collection Items to “Pass Checker-Hot List Reasons” if necessary.
6) Update Pass Checker Language Strings (optional)
Logged in as admin, click on the LANGUAGE Tab on the admin toolbar. Scroll down to Pass Checker, and click on it to expand entries.
All entries have default copy supplied, so you do not have to edit if you choose not to. Note that the entry entitled “Invalid Media Error Text” includes a spaceholder for a phone number, which must be customized by the resort.
Like this page? Click the like button below. Don't like this page and/or want to give feedback about this page, leave a comment below and Aspenware will address to improve this article.