Content Comparison

Setup Checklist

Prerequisite Tasks

Infrastructure Tasks

1. Download Chrome Extension

This step is a pre-requisite to confirm that your setup is accurate as you work through the steps of this configuration guide:

...

2. Set up Google Tag Manager Container (work with Aspenware representative)

The GTM container defines the correct Google Tag Manager account for tracking and should reference the correct GTM ID that appears in your GTM account. Within the GTM Workspace, Google provides install instructions to insert the highlighted code, also known as a container, into the head of every page on your site. The GTM container and ID are configured within your site’s code and cannot be changed without development. Contact Aspenware at support@aspenware.com to update your GTM container. Within your Google Tag Manager workspace, notice the GTM ID in the upper right corner. Copy the GTM code and send it to Aspenware if this code has changed or needs to be updated.

...

• Open Google Tag Assistant on shop.yourdomain.com and ensure it is enabled. The list of results should include Google Tag Manager with your GTM ID. If the Google Tag Manager code doesn’t appear in Google Tag Assistant, like in the image below, then the setup is incomplete. Contact Aspenware ski-support@aspenware.com if your GTM container is not present. 
  

  

Detailed Setup Guide

1. Set Up Google Analytics ID and Virtual Page View (set up in GTM Workspace)

...

5. Track Due on Arrival Transactions for Golf Tee Times (Optional)

1. Set Up Google Analytics ID Variables within the GTM Workspace

A GTM ID on every page is not a replacement for a Google Analytics Tracking ID, so the Google Analytics Tracking ID (e.g. UA-XXXXXX) should also be included on every page. Because Aspenware Commerce is a single-page application, moving between pages does not trigger events using traditional page views. Instead, the site utilizes virtual pageviews, which require a special setup in GTM. Follow the steps below.

• Check your setup - Open Google Tag Assistant and confirm that Google Analytics shows in the first row. You should see Google Analytics with your Google Analytics Tracking ID in the list of results. If your Tracking ID doesn’t appear in Google Tag Assistant, like the image below, then the setup is incomplete. If your setup matches the desired setup, proceed to continue checking the setup. If your setup does not match the desired setup, view the sub-section below and continue following the steps to set it up properly. 
  

  

  • If your setup does not match the desired setup, go to http://tagmanager.google.com > Variables> under User-Defined Variables > click the New button. Give the new variable the following settings:

    • Title: Virtual Page URL 

    • Variable type: Data Layer Variable 

    • Data Layer Variable Name: Type - “virtualPageURL”

    • Version: Version 2

    • Save the variable.

    

  • Create a second new Variable:

    • Title: Virtual Page Title

    • Variable type: Data Layer Variable 

    • Data Layer Variable Name: Type - “virtualPageTitle”

    • Version: Version 2

    • Save the variable.

  • 

    Create a third new Variable:

    • Title: Tracking ID

    • Variable type: Constant 

    • Value: Enter the Google Analytics Tracking ID (found within Google’s Google Analytics Admin screen http://analytics.google.com on the desired property and starts with “UA”)

    • Save the variable.

    

  • Create a fourth new Variable: 

    • Title: Google Analytics

    • Variable type: Google Analytics Settings 

    • Tracking ID: Input the Tracking ID found within http://analytics.google.com/ (i.e: UA-#####-#)

    • Cookie Domain: auto

    • Open More Settings 

      1. Click Fields to Set > Click + Add Field > Input Field Name as “page” > input Value as “{{Virtual Page URL}}”

      2. Click + Add Field > Input Field Name as “title” > input Value as “{{Virtual Page Title}}”

    • Save

  • 

2. Set Up Virtual Pageviews within the GTM Workspace

Every time a user goes to a page, new category, product, or step of checkout within the single page application, a virtual pageview occurs; however, a standard pageview does not occur. This is the recommended setup for populating the Google Analytics Tracking ID and for tracking virtual pageviews as pageviews:

...

• If your setup does not match the desired setup, go to http://tagmanager.google.com > Triggers > and select New to create a new trigger:

  • Title: Virtual Page View

  • Type: Custom Event

  • Event Name: VirtualPageview 

  • This Trigger Fires on: All Custom Events

  • Save the trigger.

  

• Go to your GTM Workspace > Select Tags > click New to create a new tag:

  • Title: GA Pageview

    • Click the Tag Configuration block and choose “Google Analytics: Universal Analytics”

    • Track Type: Page View

    • Google Analytics Settings: Set to the new variable created in the step above called “{{Google Analytics}}”

    • Before saving complete the step below
      

      

  • Next, select the Triggering section and add a new trigger

    • Choose the trigger you created in an earlier step titled “Virtual Page View”

    • When you are finished, your new tag should look like the image below. Once it matches the following configuration, Save your new tag. 
      

      

  • To see this successfully working, preview your changes and then publish your changes made in GTM workspace.

  • To see this showing up in your live site, preview and then publish to see this new tag capturing pageview data. 

3. Track Google Analytics Transaction Data 

Aspenware E-commerce includes the foundations of what is needed to track transactions by capturing transaction information in the Data Layer upon order completion. Transaction information that is captured includes order number, product skus, product names, product cost, transaction total, etc. In order for this information to be properly populated in Google Analytics, a tag and trigger must first be set up. To determine if your GTM account is properly set up for capturing transaction data, review the following steps:

• Check your setup - Enable Google Tag Assistant within your test or live shop before you begin checkout. Go into the shop or test shop and complete a transaction. Open the Google Tag Assistant and see if the following (see screenshots below) is true for your setup. If your Google Analytics code does not appear in Google Tag Assistant and match the image below, then your setup is incomplete and you can follow the steps below:

  • Select Google Analytics from the results

  • From within Google Analytics, notice an area toward the bottom of the assistant with Transaction and select this:

    

  • Page between the Transaction tabs. The first page lists the product, or order item information, and the second page lists the order total information on the metadata tab.  
    

    

• If your setup does not match the desired setup, ensure Ecommerce is enabled in your Google Analytics reports, and then follow these steps:

  • Sign in to Google Analytics

  • Click Admin, and navigate to the view you want

  • In the VIEW column, click Ecommerce Settings

  • Set Enable Ecommerce to ON

  • Save settings.

...

• Next, go to your GTM Workspace http://tagmanager.google.com > click Triggers > and click New to create a new trigger: 

  • Title: Event Transaction Complete

  • Trigger type: Custom Event 

  • Event Name: transaction-complete

  • This trigger fires on: All Custom Events

  • Click Save to save the trigger

...

• Next click the Tags section > then click New to create a new tag:

  • Title: Transaction

  • Tag type: Google Analytics: Universal Analytics 

  • Track Type: Transaction

  • Google Analytics Settings: {{Google Analytics}}

  • Then click Triggering and set the Trigger to the trigger created in an earlier step “Event Transaction Complete”

  • Click Save to save the tag.

...

• Once you have tested an order in preview mode to ensure the newly created tag is firing on order complete, publish your changes. 

4. Track Day of Arrival for Ecommerce Transaction Analytics (Optional)

Date-based products, such as lift tickets, rentals, lessons, etc. that are sold through the Aspenware Commerce platform have both a purchase date and an arrival date. With the release of 1.11.2, both the purchase date and arrival date can be tracked and reported in Google Analytics, this allows for deeper analysis on how pricing and promotions drive purchases for specific arrival dates.  

...

• Go to http://analytics.google.com > select Admin > under Property select Custom Definitions > then select Custom Dimensions 

  

• Select New Custom Dimension and set it up as follows: 

  • Name: Start Date

  • Scope: Hit

  • Active: Checked

  • Save it. 
    

    

• Once saved, a custom dimension Index number will be assigned to the new dimension. You will use this number in your GTM Setup.

  

• Go to your GTM workspace http://tagmanager.google.com > click Variables> select New to create a new User-Defined Variable. 

  • Name: DLV- Transaction Day of Arrival

  • Variable Type: Data Layer Variable

  • Data Layer Variable Name: startDate

  • Data Layer Version: Version 2

  • Save the variable. 

    

• Click Tags > open the “Transaction” tag variable 

  • Google Analytics Settings: Update to “Select Settings Variable”

  • Enable overriding settings in this tag: Checked

  • Tracking ID: Choose the Tracking ID variable that links to your Google Analytics tracking ID  (i.e: {{Tracking ID}}).

  • Open up More Settings, and then expand Custom Dimensions. Add a Custom Dimension.

    • Index: Enter the Index number of the custom variable created above in GA Admin, i.e. 1, 2, etc.,

    • Select the lego looking icon

    • Choose the new DLV- Transaction Due on Arrival variable you just created.

  • Save the Transaction Tag.

    

• When you go into Google Analytics and filter data by secondary dimensions, Start Date is an option under the Custom Dimensions menu. 
  

  

5. Track Due on Arrival Transactions for Golf Tee Times (Optional)

Golf tee times are unique from other products because they do not charge to reserve a tee time online, but rather charge the guest at the time they check-in. Ecommerce collects a Due on Arrival rate and charges nothing for the transaction total. Therefore analytics needs to be able to accurately reflect the amount that will be charged for the reserved tee times. 

...

• From within your GTM Workspace go to Variables and select New to create a new User-Defined Variable. 

  • Name: DLV- Transaction Due on Arrival

  • Variable Type: Data Layer Variable

  • Data Layer Variable Name: transactionDueOnArrival

  • Data Layer Version: Version 2

  • Save the new variable. 
    

    

    
    

• Within Tags, open the “Transaction Tag” variable and edit it. 

  • Google Analytics Settings: Update to “Select Settings Variable”

  • Enable overriding settings in this tag: Checked

  • Tracking ID: Choose the Tracking ID variable that links to your Google Analytics tracking ID  (i.e: {{Tracking ID}}).

  • Open up More Settings, and then expand Custom Dimensions. Add a Custom Dimension.

    • Index: 1

    • Dimension value: Select the lego looking icon

    • Choose the new DLV- Transaction Due on Arrival variable you just created.

  • Save the Transaction Tag.

    

    
    

    

• Go to Custom Definitions (under Property)> Custom Dimensions within your Google Analytics admin. 

  

• Select New Custom Dimension and set it up as follows: 

  • Name: Due on Arrival

  • Scope: Hit

  • Active: Checked

  • Save the Custom Dimension.
    

    

• Now, when you go into Google Analytics and filter data by secondary dimensions, Due on Arrival is an option under the Custom Dimensions menu. 
  

  

...