Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents

...

1. POS TASKS

  • Update stored procedure updates procedures in RTP|One (contact your Aspenware Representative for assistance.)

    Status
    colourRed
    titleRequired

  • Obtain RTP|One prompt code(s) for use in Aspenware Commerce configuration.

    Status
    colourRed
    titleRequired

Status
colourYellow
titlePrerequisite

2. COMMERCE TASKS

  • Ensure that the products to which you are assigning are set up in Aspenware Commerce.

    Status
    colourRed
    titleRequired

Status
colourYellow
titlePrerequisite

1. Configure Regular (Non-SheerID) Validated Prompts

Status
colourRed
titleRequired

  • Go to Aspenware Commerce > Product Prompts in Admin.

  • Select Add Product Prompt and enter the following details:

    1. Text: Prompt text (what you want to be visible to customers.)

    2. Code: RTP|One prompt code.

    3. Prompt type: Select ‘String’

    4. Validate On Checkout Assignment: Check if the prompt in RTP|One is set up to check valid customer assignment. Do not check if the guest should enter a code. 

    5. Is Validation prompt: Check

    6. Is Required: Check

    7. Prevent Duplicates: This disables the ability to use the same prompt value again within the same transaction.  Recommended for single-use vouchers.  

  • Click Add.

2. Assign Prompt to Product

Status
colourRed
titlerequired

  • Return to the Product Prompts page.

  • Click View Assigned Product Prompts.

  • Click Add Product Prompt Assignment.

  • Choose the desired product from the list of products.

  • From the Product Attribute drop-down, select All if the same validation prompt applies to the entire product, or if a validation prompt should only be assigned to one attribute selection, select the attribute to assign the prompt to. 

  • Select the Product Prompt you just created in the previous section.

  • Click Add.

Status
colourGreen
titleDetailed Setup

...

1. Configure Regular (Non-SheerID) Validated Prompts

  • Go to Aspenware Commerce > Product Prompts in Admin.

  • Select Add Product Prompt and enter the following details:

    1. Text: Prompt text (what you want to be visible to customers.)

    2. Code: RTP|One prompt code.

    3. Prompt type: Select ‘String’

    4. Validate On Checkout Assignment: Check if the prompt in RTP|One is set up to check valid customer assignment. Do not check if the guest should enter a code. 

    5. Is Validation prompt: Check

    6. Is Required: Check

    7. Prevent Duplicates: This disables the ability to use the same prompt value again within the same transaction.  Recommended for single-use vouchers.  

  • Click Add.

...

2. Assign Prompt to Product

  • Return to the Product Prompts page.

  • Click View Assigned Product Prompts.

  • Click Add Product Prompt Assignment.

  • Choose the desired product from the list of products.

  • From the Product Attribute drop-down, select All if the same validation prompt applies to the entire product, or if a validation prompt should only be assigned to one attribute selection, select the attribute to assign the prompt to. 

  • Select the Product Prompt you just created in the previous section.

  • Click Add.

...

Insert excerpt
AE:Like this Page Excerpt
AE:Like this Page Excerpt
nopaneltrue

...